-
Idaho Enacts Housing Reforms to Expand ADUs, Manufactured Homes, and Starter Housing
IDAHO | November 2026
Idaho has enacted a series of residential zoning and housing reforms intended to expand housing options, reduce certain development barriers, and make it easier to build smaller and more attainable homes.
Signed by Governor Brad Little during the 2026 legislative session, the measures address accessory dwelling units (ADUs), manufactured housing, starter-home subdivisions, limited property lot divisions, and small apartment buildings with a single stairway.
Most of the legislation took effect on July 1, 2026, while certain local zoning updates must be completed by February 1, 2027.
For homeowners, property owners, prospective buyers, and community associations, these changes are significant because they affect how certain residential properties can be developed and what local governments and HOAs may regulate.
Key Provisions of Idaho’s New Housing Legislation
The reforms consist of several separate laws rather than one comprehensive zoning bill. Each addresses a different part of the state’s housing supply challenges.
1. Accessory Dwelling Units and HOA Restrictions
Senate Bill 1354 establishes new requirements for accessory dwelling units, commonly known as ADUs.
An ADU is a smaller secondary residential unit located on the same property as a primary home. Examples include backyard cottages, converted garages, and qualifying internal living units.
The legislation requires covered local governments to allow at least one ADU per lot as a permitted residential use in applicable single-family residential areas.
Cities with populations above 10,000 must update their comprehensive plans and land-use regulations by February 1, 2027.
The law also addresses HOA restrictions. Associations generally cannot adopt, amend, or enforce covenants that prohibit qualifying ADUs unless the affected property owner expressly agrees to the restriction in writing.
However, this does not mean HOAs lose all authority over ADUs. The legislation allows reasonable rules governing matters such as size, height, setbacks, parking, open space, and bedroom requirements for qualifying internal ADUs.
For community associations, understanding the distinction between a prohibited blanket ban and permissible property standards will be important when reviewing governing documents and responding to homeowner requests.
2. Manufactured Housing in Residential Areas
House Bill 800 updates Idaho’s rules for placing manufactured homes in residential neighborhoods.
Under the legislation, local governments must amend their comprehensive plans and zoning regulations to allow qualifying manufactured single-unit homes in areas where single-family homes are permitted, subject to the law’s exceptions and applicable standards.
The law also distinguishes between different types of manufactured housing:
- Single-unit manufactured homes: May be permitted in areas zoned for single-family residential use.
- Manufactured duplexes and other multi-unit homes: May be located in areas where multifamily housing is permitted.
The legislation also lowers certain minimum size requirements. Local governments may allow single-section manufactured homes with at least 400 square feet and multisectional manufactured homes with at least 800 square feet.
Other placement standards may still apply, including foundation requirements, exterior appearance, roofing, and development standards comparable to those imposed on conventional homes.
An important distinction for HOA communities is that the law does not automatically invalidate existing recorded restrictive covenants governing manufactured homes. Idaho’s statute specifically preserves recorded covenants.
This means property owners and associations should review the applicable state law, recorded covenants, and property-specific restrictions before assuming a manufactured home can be placed on a particular lot.
3. Starter-Home Subdivisions and Smaller Lots
Senate Bill 1352 creates a statewide framework for starter-home subdivisions.
The legislation is intended to make smaller, more attainable single-family homes possible by limiting certain local zoning requirements that can make residential development more expensive.
A qualifying starter-home subdivision generally must:
- Cover at least four acres.
- Provide single-family detached homes.
- Use lots no larger than 1,500 square feet.
- Incorporate compact home designs and efficient site planning.
Cities must update their comprehensive plans and land-use regulations by February 1, 2027, to allow qualifying starter-home subdivisions in residential zoning districts, with exceptions for designated historic areas and certain infrastructure or environmental constraints.
The law also limits certain requirements involving minimum lot sizes, setbacks, lot widths, and lot depths.
These changes are designed to create opportunities for smaller homes and more efficient residential development. They do not mean that every residential lot can automatically be divided or that all existing neighborhoods must accommodate new subdivisions.
4. Limited Lot Splits for Existing or Approved ADUs
House Bill 707 establishes an administrative process that cities and counties may use to approve certain land divisions without requiring a full subdivision platting process.
The measure is intended to address financing and ownership challenges involving properties with an existing or approved ADU or similar secondary residential structure.
For example, a property owner may need to separate the land associated with a secondary dwelling to obtain financing or establish separate ownership.
However, the process has important limitations:
- A lender or mortgage underwriter must provide documentation showing that the separation is needed for financing.
- The division cannot create additional residential entitlements or increase allowable density.
- It cannot authorize additional dwelling units or repeated lot divisions.
- Each resulting parcel must have adequate legal access and utility service.
This is a limited administrative option, not a general permission for homeowners to split their properties and build additional homes.
5. Single-Stair Apartment Buildings
House Bill 706 allows local governments to approve certain apartment buildings with one interior exit stairway instead of the traditional two-stairway arrangement.
The legislation is intended to provide more flexibility in designing smaller apartment buildings and potentially reduce some construction costs.
The provision is optional for local governments and applies only to qualifying residential buildings that meet detailed requirements.
These include limits on building height, dwelling units per floor, and floor area, along with fire-protection measures such as automatic sprinkler systems, protected stairways, fire-rated construction, and smoke and fire detection.
The law does not require every city to permit single-stair apartment buildings. Local governments must decide whether to adopt the option within their building-code framework.
Idaho’s Housing Market: Affordability Remains a Concern
The zoning reforms come as Idaho continues to face housing affordability challenges.
According to Redfin’s October 2026 housing market data:
- Median sale price: $492,935, up 1.6% year over year.
- Homes sold: 2,392, down 5.4%.
- Homes for sale: Down 11.8% year over year.
- Median days on market: 45 days, eight days fewer than a year earlier.
These figures indicate that home prices continued to increase modestly even as sales activity declined.
The reforms are intended to address some of the regulatory barriers affecting housing construction and development. However, zoning changes alone cannot guarantee lower home prices or an immediate increase in available homes.
Actual results will depend on construction costs, land availability, financing, infrastructure capacity, local implementation, and whether developers move forward with qualifying projects.
What the Reforms Mean for Homeowners and Community Associations
Idaho’s new housing laws have direct implications for community associations, particularly those governing single-family neighborhoods and residential developments.
Reviewing HOA governing documents
Associations should review their declarations, covenants, and architectural guidelines to determine whether existing provisions are affected by the new ADU legislation.
The changes do not eliminate every architectural or property-use standard. However, blanket restrictions that conflict with applicable state law may need to be reviewed.
Handling homeowner requests
Community managers and HOA boards may receive more questions about backyard cottages, garage conversions, manufactured homes, and other secondary housing options.
Clear procedures for reviewing applications, communicating requirements, and distinguishing permitted standards from prohibited restrictions can help prevent misunderstandings.
Planning for neighborhood changes
Additional housing options may affect parking demand, utility use, property access, landscaping, and the overall appearance of a community.
Associations should understand which matters remain within their authority and which are governed by state or local law.
Maintaining financial and infrastructure planning
As communities evolve, boards should continue evaluating maintenance responsibilities, common-area capacity, insurance considerations, and long-term reserve needs.
The new legislation does not automatically require HOAs to fund or provide infrastructure for additional private residential units. Responsibilities will depend on the property, governing documents, and applicable agreements.
Practical Takeaways for Buyers, Sellers, and Property Owners
Residents considering property improvements or real estate purchases should take time to understand how the new legislation applies to their particular property.
- Homeowners: Review local zoning rules and HOA documents before planning an ADU or manufactured home.
- Prospective buyers: Ask about applicable restrictions, existing secondary units, utility capacity, and any association requirements.
- Property investors: Monitor local implementation of the new starter-home and ADU provisions.
- HOA boards: Review governing documents and consult qualified legal or planning professionals before changing policies.
- Developers: Check the applicable state statutes, local implementation rules, infrastructure requirements, and building codes before preparing development proposals.
Frequently Asked Questions
Can Idaho HOAs still restrict accessory dwelling units?
Idaho law limits HOA restrictions that prohibit qualifying ADUs. However, certain restrictions may remain enforceable, including restrictions expressly agreed to in writing by the affected property owner. HOAs may also adopt reasonable rules for qualifying internal ADUs.
Can homeowners automatically build an ADU on any residential lot?
No. The legislation establishes ADU requirements in covered jurisdictions, but applicable zoning, building, health, safety, infrastructure, and property-specific restrictions still matter.
Can manufactured homes now be placed in Idaho single-family neighborhoods?
State law requires local governments to allow qualifying single-unit manufactured homes in areas where single-family homes are permitted, subject to applicable exceptions and standards. Existing recorded restrictive covenants are not automatically invalidated.
Can homeowners split their property to create another home?
Not automatically. House Bill 707 creates a limited administrative process for certain divisions involving an existing or approved secondary dwelling when separation is needed for financing. It does not authorize additional housing density or unrestricted subdivision.
Will the new legislation immediately lower Idaho home prices?
Not necessarily. The reforms are intended to make additional housing development possible, but their impact on affordability will depend on how quickly qualifying projects are developed and brought to market.
When must cities update their housing regulations?
Several provisions, including the ADU and starter-home requirements, establish a February 1, 2027, deadline for covered cities to update relevant planning and land-use regulations. Most of the legislation itself became effective July 1, 2026.
The Takeaway
Idaho’s 2026 housing reforms represent a significant change in how certain residential properties can be developed, used, and regulated.
The legislation creates more opportunities for accessory dwelling units, manufactured housing, smaller starter-home subdivisions, limited property divisions, and alternative apartment designs.
For homeowners and community associations, the most important consideration is understanding where state law changes existing restrictions and where reasonable property standards and local regulations still apply.
As cities and counties work toward their implementation deadlines, residents, property owners, and HOA boards should stay informed and review their governing documents to prepare for the changes ahead.